Ok so Klas replacing the H4 internal mics is about the quality of the origi=
nal mics, not the preamp.
On the H2 it seems its the pre-amp that is noisy when using the external ja=
ck, although some reports suggest it is only occurs with certain mics.
Does the physical insertion of an external mic switch-off the internal mics=
and allow only the external signal get to the internal mic preamp?
If for some reason the two were combined then presumably an impedance mis-m=
atch and all sorts of other distortions could occur.
Paul Jacobson wrote:
>If you are using the stock xlr to 1/8" cable that comes with the NT4
>it most likely has a -12dB pad. It certainly sounds like it from your >
description.
>Rob Danielson has instructions on how to bypass the pad on his site:
>http://www.uwm.edu/~type/audio-reports/Rode_NT-4_Cable_Mod/
>NT-4_CableMod-index.htm
What external mics do perform well with an H2, or is it a switched socket t=
hing, anybody know?
cheers
roger
Roger Norwood
|