naturerecordists
[Top] [All Lists]

Re: Understanding bit-depth conversion and dithering

Subject: Re: Understanding bit-depth conversion and dithering
From: "Walter Knapp" waltknapp
Date: Wed May 23, 2007 5:13 pm ((PDT))
Posted by: "Martyn Stewart"

> The technical side to this group at the best of times gets out of hand as=
 to
> what this group was  originally set up to be.

The contrast between this group and the original group, which did get
out and record a lot is drastic. And not necessarily for the better.

> I hardly ever see recordings made out in the field only theory, I have a =
722
> & a 744 sound devices recorder, I will record in the field at 16bit and
> 24bit simultaneously in a quiet environment with the same mics at the sam=
e
> gain.  once I have done this and everybody can hear the difference (if th=
ere
> is one) can we then stop this banging our heads against a brick wall?

Just put them up unidentified as to which is which. Let those "golden
ears" ID which is which if they dare. They can vote "perfect" or "ugly".

Walt






<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU