naturerecordists
[Top] [All Lists]

Re: recorder repair

Subject: Re: recorder repair
From: "John Hartog" <>
Date: Wed, 26 Apr 2006 21:26:20 -0000
I cannot recommend taping a cable against the back of a sony MD or 
HiMD recorder. You may recall from my posts not long ago, it seemed I 
had solved my interference problem by repositioning the cable away 
from the back of the RH10.

John Hartog

--- In  "oryoki2000" <> 
wrote:
>
> "Gene Dorcas" wrote:
> > Sony RH10, has a bad mic jack
> 
> The MZ-RH10 is certainly still under warranty.
> Sony will replace your recorder with a
> refurbished unit at no charge.
> 
> In USA, go to this web site for further instructions
> about how to return the damaged recorder:
> 
> http://tinyurl.com/ncbem
> 
> Regarding the 3.5mm jack, it's definitely a weak
> link.  One way to delay the arrival of problems
> is to plug a short lead into the recorder. Leave 
> the lead plugged in at all times.  (Some people
> tape the lead to the back of the minidisc machine
> to further reduce strain on the connector.) 
> Plug and unplug the mic to the lead, not the 
> recorder itself.
> 
> --oryoki
>







________________________________________________________________________
________________________________________________________________________

<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU