Thanks for that hint! Initially recording a 30 seconds file with the
Pre-Record option switched off solved the problem.
Raimund
Henry Howard <> wrote:
>
> This is a major design flaw that Tascam is working on.
> If you record a short blank file, say 30 secondsm, it should work.
> It is only with a blank card. See the Phonography group for a full
> explanation.
>
>
> At 02:50 PM 12/29/05 +0000, you wrote:
> >The new TASCAM HD-P2 (Firmware v. 1.03) seems to have a problem
with
> >the Pre-Record mode. I always get a "Buffer Over-Run. Media might
be
> >too slow" error message once the Pre-Record mode is activated.
This
> >effect is independent of the selected sample rate and bit depth.
It
> >appears even at the lowest possible data rate (44.1kHz, 16 bit,
mono).
> >However, when I disable the Pre-Record mode, the recorder works
fine
> >at up to 192kHz/24bit/stereo with the same CF cards (I tried
various
> >Toshiba, Kodak and Hitachi cards). The integrated "Media Speed
Check"
> >also reports an "OK" for all combinations of sample rates and bit
> >depths. So, I guess that the pre-record problem is a firmware bug
that
> >will be fixed soon (I already reported it to TASCAM).
> >
> >I could also imagine that TASCAM would be able to add a MS
decoding
> >option to the "Headset Monitoring" menu in a future firmware
update.
> >
> >Raimund
________________________________________________________________________
________________________________________________________________________
"Microphones are not ears,
Loudspeakers are not birds,
A listening room is not nature."
Klas Strandberg
------------------------------------------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/naturerecordists/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
------------------------------------------------------------------------
|