naturerecordists
[Top] [All Lists]

Re: MT2496 pre noise masks mic noise

Subject: Re: MT2496 pre noise masks mic noise
From:
Date: Thu, 20 Oct 2005 09:17:59 +0200 (MEST)
Oryoki wrote:

>Just checking -- are you using the latest firmware,
>named v1-1.1.5 beta and released on 7 Oct?

Yes, I'm using the latest firmware version 1.1.5 beta.
I'm still awaiting an upgrade that introduces the mono recording mode
(currently, it only records in stereo).

>A second question: Were you using the 6.5mm monaural
>mic inputs during the tests, or the 3.5mm Tip/Ring/sleeve
>stereo input?

I used the 6.5 mm monaural mic input with activated phantom power. I also
tried the Sennheiser K6/ME66 on the 3.5mm stereo input. However, the noise
performance was not as good as on the 6.5mm monoaural input.

Regards,
Raimund

--
Lust, ein paar Euro nebenbei zu verdienen? Ohne Kosten, ohne Risiko!
Satte Provisionen f=FCr GMX Partner: http://www.gmx.net/de/go/partner


________________________________________________________________________
________________________________________________________________________

<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU