| Subject: | Basic Electricity |
|---|---|
| From: | "1GDW" <> |
| Date: | Sat, 15 Jan 2005 00:05:17 -0000 |
The WL-183 /minidisk project is moving forward but I have a question about using more than one wire to carry the microphone signal. I have a piece of four conductor shielded Canare cable. I am thinking of using the shield as ground and then double wire the other microphone leads (if one line were to break I would have a backup feed). Would this possibly reduce the signal strength being transmitted? Or would the signal just take the line of least resistance. I have other cable that I can use in place of this idea. Jerry White Muscatine, IA ________________________________________________________________________ ________________________________________________________________________ |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: freq response and aliasing of Edirol FA-101 (and FR-2) at 192 =, Rudy Trubitt |
|---|---|
| Next by Date: | Recording Mexico, Gregory Rademacher |
| Previous by Thread: | Re: Asian Bullfrog, Lang Elliott |
| Next by Thread: | Re: Basic Electricity, Rich Peet |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU