Re: Repair advise needed

Subject:	Re: Repair advise needed
From:	"1GDW" <>
Date:	Fri, 23 Apr 2004 17:10:08 -0000

Thank you for the reply but in this case I have mailed it in for
warrantee repair.
1GDW

--- In  Dan Dugan <> wrote:
> >Tried wiggling the microphone plug around in the jack, also
> >switched microphones but had no change in the dead channel.  The
> >unit did function correctly at first.
> >1GDW
>
> It's quite likely the mic input jack has a cracked solder joint.
Mini
> jacks are very vulnerable to this kind of damage from accidentally
> pulling on the cable sideways. Adam Liberman or I could probably
fix
> it. If it has a line input jack, see if both channels record from
> that.
>
> -Dan Dugan



________________________________________________________________________
________________________________________________________________________

<Prev in Thread]	Current Thread	[Next in Thread>
Repair advise needed, 1GDW Re: Repair advise needed, Dan Dugan Re: Repair advise needed, 1GDW Re: Repair advise needed, 1GDW <=

Previous by Date:	Re: Microphones, Rob Danielson
Next by Date:	Comments needed: Sharp IM-DR420 or Sony MZ-N10??, mPATH Records
Previous by Thread:	Re: Repair advise needed, 1GDW
Next by Thread:	newbie field recording question, Qua Veda
Indexes:	[Date] [Thread] [Top] [All Lists]

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU