At 21:21 2003-10-20 -0000, you wrote:
>Thanks Klas for the warning--no problem, there is plenty of room
>between the top of the battery and the PC board. The batt only needs
>to go about one cm into the handle for a firm grip.
Okay, sounds fine!
>
>By the way, this only has worked with disposable batteries, as the re-
>chargebles I have are slightly thicker in the battery's small
>dimension.
Yeah, I also find different dimensions all the time.
>
>David
>
>
>--- In Klas Strandberg
><> wrote:
>> David!
>>
>> Make sure that the battery don't press hard on the PC-board. There
>are
>> surface mounted resistors and capacitors there, which easily will
>crack if
>> the PC-board is bent just very little.
>>
>> Klas.
>>
>> At 19:08 2003-10-18 -0000, you wrote:
>> >--- In Klas Strandberg
>> ><> wrote:
>> >
>> >>> How did you deform it? I mean, the handle is made out of a
>carbon-
>> >fibre
>> >> thermoplastic which can handle 600 degrees celsius!?
>> >>
>> >> Klas.
>> > Not hard at all--just squeeze thw butt to an elliptical cross-
>> >section, insert the attached battery; the tube returns to round
>cross-
>> >section when the battery is removed.
>> >
>> >David
>> >
>> >
>> >
>> >To unsubscribe from this group, send an email to:
>> >
>> >
>> >
>> >
>> >Your use of Yahoo! Groups is subject to
>http://docs.yahoo.com/info/terms/
>> >
>> >
>> >
>> Telinga Microphones, Botarbo,
>> S-748 96 Tobo, Sweden.
>> Phone & fax int + 295 310 01
>> email:
>>
>
>
>
>To unsubscribe from this group, send an email to:
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Telinga Microphones, Botarbo,
S-748 96 Tobo, Sweden.
Phone & fax int + 295 310 01
email:
________________________________________________________________________
________________________________________________________________________
|