Thanks Klas for the warning--no problem, there is plenty of room
between the top of the battery and the PC board. The batt only needs
to go about one cm into the handle for a firm grip.
By the way, this only has worked with disposable batteries, as the re-
chargebles I have are slightly thicker in the battery's small
dimension.
David
--- In Klas Strandberg
<> wrote:
> David!
>
> Make sure that the battery don't press hard on the PC-board. There
are
> surface mounted resistors and capacitors there, which easily will
crack if
> the PC-board is bent just very little.
>
> Klas.
>
> At 19:08 2003-10-18 -0000, you wrote:
> >--- In Klas Strandberg
> ><> wrote:
> >
> >>> How did you deform it? I mean, the handle is made out of a
carbon-
> >fibre
> >> thermoplastic which can handle 600 degrees celsius!?
> >>
> >> Klas.
> > Not hard at all--just squeeze thw butt to an elliptical cross-
> >section, insert the attached battery; the tube returns to round
cross-
> >section when the battery is removed.
> >
> >David
> >
> >
> >
> >To unsubscribe from this group, send an email to:
> >
> >
> >
> >
> >Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
> Telinga Microphones, Botarbo,
> S-748 96 Tobo, Sweden.
> Phone & fax int + 295 310 01
> email:
>
________________________________________________________________________
________________________________________________________________________
|