Klas Strandberg wrote:
> That's the standard industy pin connection, although I cannot part left from
> right. It depends on how you twist the microphone. You have to make your own
> marking of left and right on the transparent plate.
I guess that's true. It's been so long since I took the mic apart I'd
forgotten I had to verify which way I had it. Never marked which side
was which, but it sounds like something to do. I preserved the way you
had the mini plug wired when I rewired my current handle for XLR. As
long as it duplicates that arrangement there would be no problem.
When I went off looking for what was the standard industry pin
connection for 5 pin I had a hard time finding anywhere that said. So, I
finally just took what the Sony had. Later I've heard from others it's
the standard.
> Yes, the two extra pins are for the external 9v feed.
>
> I have noted your needs and will get in touch with Doug about it.
Sounds good.
Walt
________________________________________________________________________
________________________________________________________________________
|