ts-7000
[Top] [All Lists]

Re: [ts-7000] auto boot from sd card without the ts-752 board.

To:
Subject: Re: [ts-7000] auto boot from sd card without the ts-752 board.
From: Jonathan Leslie <>
Date: Thu, 17 Jan 2013 13:56:12 -0800 (PST)


I tried that:

"rm linuxrc; ln -sf /linuxrc-sdroot /linuxrc; save

*After that you will see this message: Saving initrd to SD card...done 

I ran the above from the busybox prompt but it didn't work. 





--- On Thu, 1/17/13, Jonathan Klay - NOAA Federal <> wrote:

From: Jonathan Klay - NOAA Federal <>
Subject: Re: [ts-7000] auto boot from sd card without the ts-752 board.
To:
Date: Thursday, January 17, 2013, 4:44 PM

 

Let the board boot.
Do an "ls -al" -- you should see a link of linuxrc -> linuxrc-fastboot
you will need to rm linuxrc, and then ln -s linuxrc-sdroot linuxrc
to make a new link for the boot type you want.

All in the manual, I believe.

There are many ways to run your script.  Perhaps put a line in /etc/rc.local to call it.

Jonathan


On Thu, Jan 17, 2013 at 1:19 PM, Jon L <m("yahoo.com","jleslie48");" target="_blank" href="/mc/compose?to=">> wrote:
I have the TS-7500 on a hand made breadboard.  Currently to get to busybox, I have to:

1) set up a puTTY session to monitor the UART 0
2) when the busybox finishes booting, I type 'exit'
3) the debian linux boots off of the SD card.

I want on power up to boot directly from the SD card, or at least I want the busybox to automatically type in its own 'exit' on the console so it boots the debian linux everytime.   I then want the debian linux to run my startup_script.sh    starting whatever processes' I want,

can anybody give me step by step instructions?   The manual says I should be able to do this by setting MODE1 or MODE2, and I thought this was achievable by pulling these pins (5, and 7 respectively) to ground, but that does not seem to work.

sincerely,

jleslie






------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
    m("yahoogroups.com","ts-7000-digest");" target="_blank" href="/mc/compose?to=">
    m("yahoogroups.com","ts-7000-fullfeatured");" target="_blank" href="/mc/compose?to=">

<*> To unsubscribe from this group, send an email to:
    m("yahoogroups.com","ts-7000-unsubscribe");" target="_blank" href="/mc/compose?to=">

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/




--
Jonathan Klay
System Administrator -- System Manager
PMEL CNSD -- Vents Program

NOAA Using Google Get To Know Google AppsLearn About UMS


__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU