I have the TS-7500 on a hand made breadboard. Currently to get to busybox, I
have to:
1) set up a puTTY session to monitor the UART 0
2) when the busybox finishes booting, I type 'exit'
3) the debian linux boots off of the SD card.
I want on power up to boot directly from the SD card, or at least I want the
busybox to automatically type in its own 'exit' on the console so it boots the
debian linux everytime. I then want the debian linux to run my
startup_script.sh starting whatever processes' I want,
can anybody give me step by step instructions? The manual says I should be
able to do this by setting MODE1 or MODE2, and I thought this was achievable by
pulling these pins (5, and 7 respectively) to ground, but that does not seem to
work.
sincerely,
jleslie
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|