On Tue, 2 Oct 2012, hec85aragon wrote:
> Hello, I made a silly mistake with my TS-7260. I ran a script that loads
> an executable program from an SD card right after bootup. However, I
> failed to notice that it tries to mount the SD card before the SD driver
> is loaded (It is loaded manually with "modprobe sdcard-sdhc.o"). The
> original sdcard.o driver was removed. Of course, the SD card never gets
> mounted on the device, thus the executable is not found.
>
> The problem is that the call to run the executable is within an infinite
> loop, so the script gets stuck eternally as it never finds the executable
> program. Since the script runs right after bootup I don't have access to
> the prompt anymore, and have no way to modify the script or to stop it.
> Ctrl+C doesn't work.
>
> Is there another way to stop the script? or prevent it from executing?
>
> I'd really appreciate any help on this because I can't use my ts7260 at
> the moment. Thanks in advance.
Mount the sdcard in a Linux machine and edit the relevant files!!
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|