Hello, I made a silly mistake with my TS-7260. I ran a script that loads an
executable program from an SD card right after bootup. However, I failed to
notice that it tries to mount the SD card before the SD driver is loaded (It is
loaded manually with "modprobe sdcard-sdhc.o"). The original sdcard.o driver
was removed. Of course, the SD card never gets mounted on the device, thus the
executable is not found.
The problem is that the call to run the executable is within an infinite loop,
so the script gets stuck eternally as it never finds the executable program.
Since the script runs right after bootup I don't have access to the prompt
anymore, and have no way to modify the script or to stop it. Ctrl+C doesn't
work.
Is there another way to stop the script? or prevent it from executing?
I'd really appreciate any help on this because I can't use my ts7260 at the
moment.
Thanks in advance.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|