[ts-7000] TS7260 - How to stop script that loads at bootup and gets stuck

[Joel Morgan <>]

On Oct 2, 2012 11:05 AM, "hec85aragon" <> wrote:
>
>  
>
> Hello, I made a silly mistake with my TS-7260. I ran a script that loads an executable program from an SD card right after bootup. However, I failed to notice that it tries to mount the SD card before the SD driver is loaded (It is loaded manually with "modprobe sdcard-sdhc.o"). The original sdcard.o driver was removed. Of course, the SD card never gets mounted on the device, thus the executable is not found.
>
> The problem is that the call to run the executable is within an infinite loop, so the script gets stuck eternally as it never finds the executable program. Since the script runs right after bootup I don't have access to the prompt anymore, and have no way to modify the script or to stop it. Ctrl+C doesn't work.
>
> Is there another way to stop the script? or prevent it from executing?
>
> I'd really appreciate any help on this because I can't use my ts7260 at the moment.
> Thanks in advance.
>

Telnet into the device, then make the necessary changes.

-jr

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___