Hi all,
I've recently switched from the TS-7800 to the TS-7300 for the actually
programmable FPGA. However, I'm having some connection issues. When
connecting via the serial port everything behaves properly and connects.
However, when I attempt to connect via the ethernet, through PUTTY (I'm running
this on a windows 7 machine sadly) or through the standard windows FTP command,
I'm unable to make a connection. The address I'm using for the TS-7300 is
192.168.0.50, as specified in the documentation. In addition, I've also tried
192.168.0.11, which I found inside a config file on the device. These same
settings worked properly on the TS-7800 so it is a little frustrating to be
hung up on what seems to be a trivial problem. I've also attempted to ping the
host machine from the device without any success so the connection itself seems
to be the issue. Any help would be greatly appreciated, thank you!
Mike
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|