I thought it was possibly the wrong chipset, but since they said it would work
figured I was doing something wrong. Now that I know i am looking for the
rt3070L chipset at least now i can be more confident before ordering.
Do you know if the L stands for Low Power? Long range? In a quick search I
saw the chipset listed as rs3070 without the L for various adapters. I noticed
on the USB WIFI adapter link you posted it did not have an L in the chipset
name also.
Was getting your usb-wifi adapter as simple as plugging it in or was there a
few extra steps? You don't have to list the steps just wondering what i should
expect.
Thanks again for all you help
--- In João Trindade <> wrote:
>
> Maybe I'm seeing something wrong, but the chipset recommended by arm
> embedded is for the TS-7500 is rt3070L
>
> It seems like you have the rt2870 :S
>
> On Fri, May 4, 2012 at 4:38 PM, daniel.desrude
> <>wrote:
>
> > **
> >
> >
> >
> > here it is...
> >
> > ts7500:~# lsusb
> > Bus 002 Device 001: ID 0000:0000
> > Bus 001 Device 002: ID 0e66:0017 Hawking Technologies Wireless-N Network
> > Adapter [Ralink RT2870]
> > Bus 001 Device 001: ID 0000:0000
> >
> > --- In João Trindade <trindade.joao@> wrote:
> > >
> > > can you do an lsusb also?
> > >
> > > On Fri, May 4, 2012 at 4:04 PM, daniel.desrude
> > > <daniel.desrude@>wrote:
> > >
> > > > **
> >
> > > >
> > > >
> > > >
> > > > thanks
> > > >
> > > > Here is the dmesg after inserting the USB Wifi Adapter
> > > > [ 2615.310000] usb 1-2: new high speed USB device using str8100-ehci
> > and
> > > > address 2
> > > > [ 2615.480000] usb 1-2: configuration #1 chosen from 1 choice
> > > >
> > > > Here is the lsmod after inserting the USB Wifi Adapter
> > > > smsc9500 56484 0
> > > > smscusbnet 16396 1 smsc9500
> > > > g_ether 17744 0
> > > > str8100_udc 13572 1 g_ether
> > > > ohci_hcd 14372 0
> > > > usb_storage 23072 0
> > > > sd_mod 15504 0
> > > > scsi_mod 55372 2 usb_storage,sd_mod
> > > > ehci_hcd 22028 0
> > > > usbcore 74300 5 smsc9500,smscusbnet,ohci_hcd,usb_storage,ehci_hcd
> > > >
> > > >
> > > > --- In João Trindade <trindade.joao@> wrote:
> > > > >
> > > > > Can you output the dmesg output after you inserted the USB WIFI
> > card? the
> > > > > lsmod could also be useful.
> > > > >
> > > > > On Thu, May 3, 2012 at 8:48 PM, daniel.desrude
> > > > > <daniel.desrude@>wrote:
> >
> > > > >
> > > > > > **
> > > >
> > > > > >
> > > > > >
> > > > > > Thanks.
> > > > > >
> > > > > > Just to clarify I was able to get the recommended USB-N-WIFI
> > > > technologic
> > > > > > offers on their website working on the TS-7500 running the latest
> > dd.
> > > > > >
> > > > > > When I run the USB-N-WIFI with the detachable antenna I see the
> > same
> > > > > > device in the /dev directory as I would see the recommend
> > technologic
> > > > > > adapter.
> > > > > >
> > > > > > crw-rw---- 1 root root 254, 0 May 3 18:36 usbdev1.1_ep00
> > > > > > crw-rw---- 1 root root 254, 1 May 3 18:36 usbdev1.1_ep81
> > > > > > crw-rw---- 1 root root 254, 2 May 3 18:51 usbdev1.9_ep00
> > > > > > crw-rw---- 1 root root 254, 4 May 3 18:51 usbdev1.9_ep01
> > > > > > crw-rw---- 1 root root 254, 5 May 3 18:51 usbdev1.9_ep02
> > > > > > crw-rw---- 1 root root 254, 6 May 3 18:51 usbdev1.9_ep03
> > > > > > crw-rw---- 1 root root 254, 7 May 3 18:51 usbdev1.9_ep04
> > > > > > crw-rw---- 1 root root 254, 8 May 3 18:51 usbdev1.9_ep05
> > > > > > crw-rw---- 1 root root 254, 9 May 3 18:51 usbdev1.9_ep06
> > > > > > crw-rw---- 1 root root 254, 3 May 3 18:51 usbdev1.9_ep81
> > > > > > crw-rw---- 1 root root 254, 10 May 3 18:37 usbdev2.1_ep00
> > > > > > crw-rw---- 1 root root 254, 11 May 3 18:37 usbdev2.1_ep81
> > > > > >
> > > > > > However when i run the ifconfig -a command I do not see the ra0 i
> > just
> > > > see
> > > > > > eth0 and lo. this is before and after running the ifconfig ra0 up
> > > > command.
> > > > > >
> > > > > > http://wiki.embeddedarm.com/wiki/WIFI-N-USB
> > > > > >
> > > > > > Any help would be appreciated.
> > > > > >
> > > > > > Thanks
> > > > > >
> > > > > >
> > > > > > --- In João Trindade <trindade.joao@>
> > wrote:
> > > > > > >
> > > > > > > If you use the latest dd in arms embedded site, yes, it was
> > > > > > straightforward.
> > > > > > >
> > > > > > > I can give you some help if you need it.
> > > > > > >
> > > > > > > Cheers
> > > > > > >
> > > > > > > On Thu, May 3, 2012 at 7:59 PM, daniel.desrude
> > > > > > > <daniel.desrude@>wrote:
> > > >
> > > > > > >
> > > > > > > > **
> > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > João
> > > > > > > >
> > > > > > > > I received the following usb wifi adapter
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> > http://www.gohawking.com/store/product_info.php?products_id=438&osCsid=valhhlsf19rnueqs8shgdgduk1
> > > > > > > >
> > > > > > > > ts-7500 support recommended to to try this one since it uses
> > the
> > > > same
> > > > > > > > driver. But there was no guarantee it would work. So far I
> > have yet
> > > > > > been
> > > > > > > > able to get it to work.
> > > > > > > >
> > > > > > > > Did yours immediately recognize the USB WIFI Adapter or was
> > there a
> > > > > > > > considerable amount of effort to get it up and running?
> > > > > > > >
> > > > > > > > Thanks in advance
> > > > > > > > Dan
> > > > > > > >
> > > > > > > >
> > > > > > > > --- In João Trindade <trindade.joao@>
> > > > wrote:
> > > > > > > > >
> > > > > > > > > We are using these:
> > > > > > > > >
> > > > > > > > >
> > http://www.premiertek.net/products/networking/PT-H9DN-ROC.html
> > > > > > > > >
> > > > > > > > > Have a good range and ah hoc system seems to work ok. (still
> > > > haven't
> > > > > > test
> > > > > > > > > it properly)
> > > > > > > > >
> > > > > > > > > Cheers
> > > > > > > > >
> > > > > > > > > On Mon, Apr 23, 2012 at 8:43 PM, dannyd5000 <dannyd4000@>
> > wrote:
> > > > > > > > >
> > > > > > > > > > **
> > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Has anyone out there had any luck with any other USB-WIFI
> > > > adapters
> > > > > > that
> > > > > > > > > > worked with no effort, other than the ones offered through
> > the
> > > > > > > > technologic
> > > > > > > > > > website?
> > > > > > > > > >
> > > > > > > > > > Particularly I am looking for a WIFI USB Adapter with an
> > > > external
> > > > > > > > antenna.
> > > > > > > > > > If anyone out there has had any luck with anything out
> > there
> > > > that
> > > > > > they
> > > > > > > > did
> > > > > > > > > > not have to write additional drivers for let me know.
> > > > > > > > > >
> > > > > > > > > > Thanks in advance,
> > > > > > > > > > Dan
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > João Trindade <trindade.joao@>
> > > > > > > >
> > > > > > > > > Telephone: +351 93 561 39 10
> > > > > > > > > http://cnm.tagus.inesc-id.pt/joao+trindade
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > João Trindade <trindade.joao@>
> > > > > > > Telephone: +351 93 561 39 10
> > > > > > > http://cnm.tagus.inesc-id.pt/joao+trindade
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > João Trindade <trindade.joao@>
> > > > > Telephone: +351 93 561 39 10
> > > > > http://cnm.tagus.inesc-id.pt/joao+trindade
> > > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > > --
> > > João Trindade <trindade.joao@>
> > > Telephone: +351 93 561 39 10
> > > http://cnm.tagus.inesc-id.pt/joao+trindade
> > >
> >
> >
> >
>
>
>
> --
> João Trindade <>
> Telephone: +351 93 561 39 10
> http://cnm.tagus.inesc-id.pt/joao+trindade
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|