ts-7000
[Top] [All Lists]

Re: [ts-7000] Re: ts-7500 :USB-WIFI adapters with external antenna

To:
Subject: Re: [ts-7000] Re: ts-7500 :USB-WIFI adapters with external antenna
From: João Trindade <>
Date: Fri, 4 May 2012 16:50:35 +0100


Maybe I'm seeing something wrong, but the chipset recommended by arm embedded is for the TS-7500 is rt3070L

It seems like you have the rt2870 :S

On Fri, May 4, 2012 at 4:38 PM, daniel.desrude <> wrote:
 


here it is...

ts7500:~# lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 0e66:0017 Hawking Technologies Wireless-N Network Adapter [Ralink RT2870]
Bus 001 Device 001: ID 0000:0000


--- In ts-7000%40yahoogroups.com, João Trindade <> wrote:
>
> can you do an lsusb also?
>
> On Fri, May 4, 2012 at 4:04 PM, daniel.desrude
> <>wrote:
>
> > **

> >
> >
> >
> > thanks
> >
> > Here is the dmesg after inserting the USB Wifi Adapter
> > [ 2615.310000] usb 1-2: new high speed USB device using str8100-ehci and
> > address 2
> > [ 2615.480000] usb 1-2: configuration #1 chosen from 1 choice
> >
> > Here is the lsmod after inserting the USB Wifi Adapter
> > smsc9500 56484 0
> > smscusbnet 16396 1 smsc9500
> > g_ether 17744 0
> > str8100_udc 13572 1 g_ether
> > ohci_hcd 14372 0
> > usb_storage 23072 0
> > sd_mod 15504 0
> > scsi_mod 55372 2 usb_storage,sd_mod
> > ehci_hcd 22028 0
> > usbcore 74300 5 smsc9500,smscusbnet,ohci_hcd,usb_storage,ehci_hcd
> >
> >
> > --- In ts-7000%40yahoogroups.com, João Trindade <trindade.joao@> wrote:
> > >
> > > Can you output the dmesg output after you inserted the USB WIFI card? the
> > > lsmod could also be useful.
> > >
> > > On Thu, May 3, 2012 at 8:48 PM, daniel.desrude
> > > <daniel.desrude@>wrote:

> > >
> > > > **
> >
> > > >
> > > >
> > > > Thanks.
> > > >
> > > > Just to clarify I was able to get the recommended USB-N-WIFI
> > technologic
> > > > offers on their website working on the TS-7500 running the latest dd.
> > > >
> > > > When I run the USB-N-WIFI with the detachable antenna I see the same
> > > > device in the /dev directory as I would see the recommend technologic
> > > > adapter.
> > > >
> > > > crw-rw---- 1 root root 254, 0 May 3 18:36 usbdev1.1_ep00
> > > > crw-rw---- 1 root root 254, 1 May 3 18:36 usbdev1.1_ep81
> > > > crw-rw---- 1 root root 254, 2 May 3 18:51 usbdev1.9_ep00
> > > > crw-rw---- 1 root root 254, 4 May 3 18:51 usbdev1.9_ep01
> > > > crw-rw---- 1 root root 254, 5 May 3 18:51 usbdev1.9_ep02
> > > > crw-rw---- 1 root root 254, 6 May 3 18:51 usbdev1.9_ep03
> > > > crw-rw---- 1 root root 254, 7 May 3 18:51 usbdev1.9_ep04
> > > > crw-rw---- 1 root root 254, 8 May 3 18:51 usbdev1.9_ep05
> > > > crw-rw---- 1 root root 254, 9 May 3 18:51 usbdev1.9_ep06
> > > > crw-rw---- 1 root root 254, 3 May 3 18:51 usbdev1.9_ep81
> > > > crw-rw---- 1 root root 254, 10 May 3 18:37 usbdev2.1_ep00
> > > > crw-rw---- 1 root root 254, 11 May 3 18:37 usbdev2.1_ep81
> > > >
> > > > However when i run the ifconfig -a command I do not see the ra0 i just
> > see
> > > > eth0 and lo. this is before and after running the ifconfig ra0 up
> > command.
> > > >
> > > > http://wiki.embeddedarm.com/wiki/WIFI-N-USB
> > > >
> > > > Any help would be appreciated.
> > > >
> > > > Thanks
> > > >
> > > >
> > > > --- In ts-7000%40yahoogroups.com, João Trindade <trindade.joao@> wrote:
> > > > >
> > > > > If you use the latest dd in arms embedded site, yes, it was
> > > > straightforward.
> > > > >
> > > > > I can give you some help if you need it.
> > > > >
> > > > > Cheers
> > > > >
> > > > > On Thu, May 3, 2012 at 7:59 PM, daniel.desrude
> > > > > <daniel.desrude@>wrote:
> >
> > > > >
> > > > > > **
> > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > João
> > > > > >
> > > > > > I received the following usb wifi adapter
> > > > > >
> > > > > >
> > > > > >
> > > >
> > http://www.gohawking.com/store/product_info.php?products_id=438&osCsid=valhhlsf19rnueqs8shgdgduk1
> > > > > >
> > > > > > ts-7500 support recommended to to try this one since it uses the
> > same
> > > > > > driver. But there was no guarantee it would work. So far I have yet
> > > > been
> > > > > > able to get it to work.
> > > > > >
> > > > > > Did yours immediately recognize the USB WIFI Adapter or was there a
> > > > > > considerable amount of effort to get it up and running?
> > > > > >
> > > > > > Thanks in advance
> > > > > > Dan
> > > > > >
> > > > > >
> > > > > > --- In ts-7000%40yahoogroups.com, João Trindade <trindade.joao@>
> > wrote:
> > > > > > >
> > > > > > > We are using these:
> > > > > > >
> > > > > > > http://www.premiertek.net/products/networking/PT-H9DN-ROC.html
> > > > > > >
> > > > > > > Have a good range and ah hoc system seems to work ok. (still
> > haven't
> > > > test
> > > > > > > it properly)
> > > > > > >
> > > > > > > Cheers
> > > > > > >
> > > > > > > On Mon, Apr 23, 2012 at 8:43 PM, dannyd5000 <dannyd4000@> wrote:
> > > > > > >
> > > > > > > > **
> > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Has anyone out there had any luck with any other USB-WIFI
> > adapters
> > > > that
> > > > > > > > worked with no effort, other than the ones offered through the
> > > > > > technologic
> > > > > > > > website?
> > > > > > > >
> > > > > > > > Particularly I am looking for a WIFI USB Adapter with an
> > external
> > > > > > antenna.
> > > > > > > > If anyone out there has had any luck with anything out there
> > that
> > > > they
> > > > > > did
> > > > > > > > not have to write additional drivers for let me know.
> > > > > > > >
> > > > > > > > Thanks in advance,
> > > > > > > > Dan
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > João Trindade <trindade.joao@>
> > > > > >
> > > > > > > Telephone: +351 93 561 39 10
> > > > > > > http://cnm.tagus.inesc-id.pt/joao+trindade
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > João Trindade <trindade.joao@>
> > > > > Telephone: +351 93 561 39 10
> > > > > http://cnm.tagus.inesc-id.pt/joao+trindade
> > > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > > --
> > > João Trindade <trindade.joao@>
> > > Telephone: +351 93 561 39 10
> > > http://cnm.tagus.inesc-id.pt/joao+trindade
> > >
> >
> >
> >
>
>
>
> --
> João Trindade <>
> Telephone: +351 93 561 39 10
> http://cnm.tagus.inesc-id.pt/joao+trindade
>




--
João Trindade      <>
Telephone: +351 93 561 39 10
http://cnm.tagus.inesc-id.pt/joao+trindade



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU