ts-7000
[Top] [All Lists]

[ts-7000] Re: ts-7500 :USB-WIFI adapters with external antenna

To:
Subject: [ts-7000] Re: ts-7500 :USB-WIFI adapters with external antenna
From: "daniel.desrude" <>
Date: Fri, 04 May 2012 15:04:03 -0000
thanks

Here is the dmesg after inserting the USB Wifi Adapter
[ 2615.310000] usb 1-2: new high speed USB device using str8100-ehci and 
address 2
[ 2615.480000] usb 1-2: configuration #1 chosen from 1 choice

Here is the lsmod after inserting the USB Wifi Adapter
smsc9500               56484  0
smscusbnet             16396  1 smsc9500
g_ether                17744  0
str8100_udc            13572  1 g_ether
ohci_hcd               14372  0
usb_storage            23072  0
sd_mod                 15504  0
scsi_mod               55372  2 usb_storage,sd_mod
ehci_hcd               22028  0
usbcore                74300  5 
smsc9500,smscusbnet,ohci_hcd,usb_storage,ehci_hcd


--- In  João Trindade <> wrote:
>
> Can you output the dmesg output after you inserted the USB WIFI card? the
> lsmod could also be useful.
>
> On Thu, May 3, 2012 at 8:48 PM, daniel.desrude
> <>wrote:
>
> > **
> >
> >
> > Thanks.
> >
> > Just to clarify I was able to get the recommended USB-N-WIFI technologic
> > offers on their website working on the TS-7500 running the latest dd.
> >
> > When I run the USB-N-WIFI with the detachable antenna I see the same
> > device in the /dev directory as I would see the recommend technologic
> > adapter.
> >
> > crw-rw---- 1 root root 254, 0 May 3 18:36 usbdev1.1_ep00
> > crw-rw---- 1 root root 254, 1 May 3 18:36 usbdev1.1_ep81
> > crw-rw---- 1 root root 254, 2 May 3 18:51 usbdev1.9_ep00
> > crw-rw---- 1 root root 254, 4 May 3 18:51 usbdev1.9_ep01
> > crw-rw---- 1 root root 254, 5 May 3 18:51 usbdev1.9_ep02
> > crw-rw---- 1 root root 254, 6 May 3 18:51 usbdev1.9_ep03
> > crw-rw---- 1 root root 254, 7 May 3 18:51 usbdev1.9_ep04
> > crw-rw---- 1 root root 254, 8 May 3 18:51 usbdev1.9_ep05
> > crw-rw---- 1 root root 254, 9 May 3 18:51 usbdev1.9_ep06
> > crw-rw---- 1 root root 254, 3 May 3 18:51 usbdev1.9_ep81
> > crw-rw---- 1 root root 254, 10 May 3 18:37 usbdev2.1_ep00
> > crw-rw---- 1 root root 254, 11 May 3 18:37 usbdev2.1_ep81
> >
> > However when i run the ifconfig -a command I do not see the ra0 i just see
> > eth0 and lo. this is before and after running the ifconfig ra0 up command.
> >
> > http://wiki.embeddedarm.com/wiki/WIFI-N-USB
> >
> > Any help would be appreciated.
> >
> > Thanks
> >
> >
> > --- In  João Trindade <trindade.joao@> wrote:
> > >
> > > If you use the latest dd in arms embedded site, yes, it was
> > straightforward.
> > >
> > > I can give you some help if you need it.
> > >
> > > Cheers
> > >
> > > On Thu, May 3, 2012 at 7:59 PM, daniel.desrude
> > > <daniel.desrude@>wrote:
> > >
> > > > **
> >
> > > >
> > > >
> > > >
> > > >
> > > > João
> > > >
> > > > I received the following usb wifi adapter
> > > >
> > > >
> > > >
> > http://www.gohawking.com/store/product_info.php?products_id=438&osCsid=valhhlsf19rnueqs8shgdgduk1
> > > >
> > > > ts-7500 support recommended to to try this one since it uses the same
> > > > driver. But there was no guarantee it would work. So far I have yet
> > been
> > > > able to get it to work.
> > > >
> > > > Did yours immediately recognize the USB WIFI Adapter or was there a
> > > > considerable amount of effort to get it up and running?
> > > >
> > > > Thanks in advance
> > > > Dan
> > > >
> > > >
> > > > --- In  João Trindade <trindade.joao@> wrote:
> > > > >
> > > > > We are using these:
> > > > >
> > > > > http://www.premiertek.net/products/networking/PT-H9DN-ROC.html
> > > > >
> > > > > Have a good range and ah hoc system seems to work ok. (still haven't
> > test
> > > > > it properly)
> > > > >
> > > > > Cheers
> > > > >
> > > > > On Mon, Apr 23, 2012 at 8:43 PM, dannyd5000 <dannyd4000@> wrote:
> > > > >
> > > > > > **
> > > >
> > > > > >
> > > > > >
> > > > > > Has anyone out there had any luck with any other USB-WIFI adapters
> > that
> > > > > > worked with no effort, other than the ones offered through the
> > > > technologic
> > > > > > website?
> > > > > >
> > > > > > Particularly I am looking for a WIFI USB Adapter with an external
> > > > antenna.
> > > > > > If anyone out there has had any luck with anything out there that
> > they
> > > > did
> > > > > > not have to write additional drivers for let me know.
> > > > > >
> > > > > > Thanks in advance,
> > > > > > Dan
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > João Trindade <trindade.joao@>
> > > >
> > > > > Telephone: +351 93 561 39 10
> > > > > http://cnm.tagus.inesc-id.pt/joao+trindade
> > > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > > --
> > > João Trindade <trindade.joao@>
> > > Telephone: +351 93 561 39 10
> > > http://cnm.tagus.inesc-id.pt/joao+trindade
> > >
> >
> > 
> >
>
>
>
> --
> João Trindade      <>
> Telephone: +351 93 561 39 10
> http://cnm.tagus.inesc-id.pt/joao+trindade
>



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
    
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU