|
read the post the fpga would only support the DMA ending interrupt From: walter marvin <> To: "" <> Sent: Saturday, July 30, 2011 2:26 PM Subject: Re: [ts-7000] Re: Using TS-7500 SBC to collect and transfer camera data over TCP/IP right. but the xuarts have internal buffering. Too bad they don't support really high speed serial. It could support interrupt driven hardware to allow dma to the processor's memory From: Ian Thompson <> To: Sent: Friday, July 29, 2011 1:46 PM Subject: Re: [ts-7000] Re: Using TS-7500 SBC to collect and transfer camera data over TCP/IP Doesn't the CPU on the 7500 interface to the FPGA via SPI?
There's no way it'll be able to support these data rates! Ian T. This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author. __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |