|
yes 100 mb Ethernet can if done right. That's only 25% load. Dedicated Ethernet can be run up to 60% load. The basic problem is getting the data on the Ethernet line at that speed. The processors at each end tend to be the bottlenecks From: Ian Thompson <> To: Sent: Friday, July 29, 2011 1:52 PM Subject: Re: [ts-7000] Re: Using TS-7500 SBC to collect and transfer camera data over TCP/IP Am I reading this correctly? 8 bits at 25MHz is 25Mbytes per second, if
they are coming in parallel. 100M ethernet isn't going to be able to support that rate. Ian T. This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author. __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |