[ts-7000] Re: send SMS via TS-7800 and TS-GSM1

["thep_in" <>]

You are right Don Tucker but from TS-GSM1 manual and TS-Modem manual has a conflict about the jumper setting for COM port. 

I have tried for

• JP1 ON, JP2 OFF, JP3 OFF / is COM2 io=2f8 as TS-GSM1 manual says and
• JP1 ON, JP2 OFF, JP3 OFF / is COM1 io=3f8 as TS-Modem mannual syas
  

and I also used again as your advice, the outputs are the same



--- In  Don Tucker <> wrote:
>
> The TS-GSM1 manual indicates that JP1 ON, JP2 OFF, JP3 OFF will use COM2 
> (ttyS1), with io=0x2f8. If you want to use ttyS2 and io=3e8, change your 
> jumpers to JP1 OFF, JP2 ON, JP3 OFF.
> 
> Don
> 
> On 5/16/2011 2:08 PM, thep_in wrote:
>

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___