[ts-7000] send SMS via TS-7800 and TS-GSM1

["thep_in" <>]

I have read a lot of mailing list here and I still got the problem.

I'm using TS-7800 with Linux ts7800 2.6.34 #4 PREEMPT Tue Oct 26 16:23:25 PDT 2010 armv5tel GNU/Linux ,the image I downloaded from http://goo.gl/nqE1H 

I connect them on pc104, setting jumper on pin1,4,5 with irq6 (as I read here (exp:http://goo.gl/uwDOY ))

when it starts, I followed this step

• . /initrd/ts7800.subr 
• pc104on
• The TS-GSM1's LED turned ON
• peekpoke 8 0xEE000198
• the result is 0xFF but the LED start blinking as the manual says
• modprobe ts7800_isa16550 irq=6 io=0x3e8
• I don't know what this command is, just followed
• dmesg
• result is ...

Linux version 2.6.34 (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #4 PREEMPT Tue Oct 26 16:23:25 PDT 2010 CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=b0053177 CPU: VIVT data cache, VIVT instruction cache Machine: Technologic Systems TS-78xx SBC Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 32768 free_area_init_node: node 0, pgdat c03d14a0, node_mem_map c03f1000 Normal zone: 256 pages used for memmap Normal zone: 0 pages reserved Normal zone: 32512 pages, LIFO batch:7 Calling iotable_init(), orion5x_io_desc[0].pfn = 0x000F1000, orion5x_io_desc[0].virtual = 0xFDD00000, orion5x_io_desc[0].length = 1048576 BUG: mapping for 0xee000000 at 0xee000000 overlaps vmalloc space Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: root=/dev/ram0 rw lpj=1662976 console=null init=/linuxrc PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 128MB = 128MB total Memory: 121820k/121820k available, 9252k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xffc00000 - 0xffe00000 ( 2 MB) vmalloc : 0xc8800000 - 0xfd800000 ( 848 MB) lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .init : 0xc0008000 - 0xc0025000 ( 116 kB) .text : 0xc0025000 - 0xc0376000 (3396 kB) .data : 0xc03b6000 - 0xc03d1ac0 ( 111 kB) SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. NR_IRQS:96 Console: colour dummy device 80x30 Calibrating delay loop (skipped) preset value.. 332.59 BogoMIPS (lpj=1662976) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok devtmpfs: initialized NET: Registered protocol family 16 Orion ID: MV88F5182-A2. TCLK=166666667. TS-78xx FPGA: magic=0x00b480, rev=0x05 TS-78xx: RTC not registered bio: create slab <bio-0> at 0 vgaarb: loaded SCSI subsystem initialized TS-7800 DMA controller init. Switching to clocksource orion_clocksource NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 32 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (junk in compressed archive); looks like an initrd Freeing initrd memory: 4096K NetWinder Floating Point Emulator V0.97 (double precision) JFS: nTxBlock = 983, nTxLock = 7869 yaffs built Oct 26 2010 16:19:14 Installing. msgmni has been set to 245 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 4) is a 16550A brd: module loaded loop: module loaded MV-643xx 10/100/1000 ethernet driver version 1.4 mv643xx_eth smi: probed net eth0: port 0 with MAC address 00:d0:69:42:0b:41 oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 17 VFP support v0.3: not present drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Warning: unable to open an initial console. RAMDISK: ext2 filesystem found at block 0 RAMDISK: Loading 1536KiB [1 disk] into ram disk... done. EXT2-fs (ram0): warning: mounting unchecked fs, running e2fsck is recommended VFS: Mounted root (ext2 filesystem) on device 1:0. devtmpfs: mounted Freeing init memory: 116K tssdcard: Technologic Systems SD card controller, address 0xe8000100 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver orion-ehci orion-ehci.0: Marvell Orion EHCI orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000 orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected orion-ehci orion-ehci.1: Marvell Orion EHCI orion-ehci orion-ehci.1: new USB bus registered, assigned bus number 2 orion-ehci orion-ehci.1: irq 12, io mem 0xf10a0000 orion-ehci orion-ehci.1: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected usb 1-1: new high speed USB device using orion-ehci and address 2 usb 2-1: new high speed USB device using orion-ehci and address 2 tssdcard: no card found. tssdcard: Technologic Systems SD card controller, address 0xe8000100 tssdcard: card /dev/tssdcardb has 3962880 sectors (LUN 1) tssdcardb: tssdcardb1 tssdcardb2 tssdcardb3 tssdcardb4 EXT2-fs (tssdcardb4): error: ext2_lookup: deleted inode referenced: 4195 Initializing USB Mass Storage driver... scsi0 : usb-storage 2-1:1.0 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. scsi 0:0:0:0: Direct-Access Kingston DT101 II 8.20 PQ: 0 ANSI: 2 sd 0:0:0:0: [sda] 7825408 512-byte logical blocks: (4.00 GB/3.73 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] Attached SCSI removable disk udev: renamed network interface eth0 to eth1 libata version 3.00 loaded. sata_mv sata_mv.0: version 1.28 sata_mv sata_mv.0: slots 32 ports 2 scsi1 : sata_mv scsi2 : sata_mv ata1: SATA max UDMA/133 irq 29 ata2: SATA max UDMA/133 irq 29 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) EXT2-fs (tssdcardb4): error: ext2_lookup: deleted inode referenced: 4195 EXT2-fs (tssdcardb4): warning: mounting unchecked fs, running e2fsck is recommended EXT2-fs (tssdcardb4): error: ext2_lookup: deleted inode referenced: 4195 EXT2-fs (tssdcardb4): error: ext2_lookup: deleted inode referenced: 4195 eth1: link up, 100 Mb/s, full duplex, flow control disabled

• cat < /dev/ttyS2 &
• [1] 1661
• Input/output error 
• [1]+ Exit 1  

What should do next?

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___