On Tue, 29 Mar 2011, wgwend wrote:
> The ts-7260-manual says that pin 1 on DIO 1 header is GND and pin 16 is +
> 3,3 V.
No it doesn't.
The manual details pin 1 as DIO_0 and pin 2 as ground. Pin 16 is indeed
+3.3V.
See "Table: DIO1 Header Pin Configuration" on page 31 of the manual.
Pin 1 is the pin nearest the white dot.
Pin 2 is the pin opposite pin 1 on the other row of pins.
Pin 15 is the other end of the row of pins to pin 1
pin 16 is the other end of the row of pins to pin 2
viz
2 4 6 8 10 12 14 16
1 3 5 7 9 11 13 15
o
^-- white dot.
> But I have it inverted. Is this possible?
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|