On Tue, 2011-03-29 at 15:19 +0000, wgwend wrote:
>
> The ts-7260-manual says that pin 1 on DIO 1 header is GND and pin 16
> is + 3,3 V.
> But I have it inverted. Is this possible?
>
pin 2 is ground. pin 16 is 3.3V. The manual also doesn't specify the
pinout of the DIO1 header. It is:
---------------------------------
2 | 4 | 6 | 8 | 10 | 12 | 14 | 16
---------------------------------
1 | 3 | 5 | 7 | 9 | 11 | 13 | 15
---------------------------------
o
--
--
Joel R. Morgan
Morgan Millwright Services, Inc.
Linux User #504110 http://counter.li.org/
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|