I found another method for control it.
I mail to TS-Staff and they suggest me to use dio that download from
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7500-linux/samples/arm-binaries/dio
Usage:
./dio<get|set> <pin#> <set_value (0|1|2)>
Anyway, I didn't use that command because i found this way.
I see that there is "dioctl server" running on kernel.
I just see help, finally, i can control dio40 by
dioctl --port=127.0.0.1 --0=40 or
dioctl --port=127.0.0.1 --1=40.
for ts7500ctl, i still wanna to know for use it in correct way.
when you remember how does it work, please tell me.
Thanks
Pakorn
--- In David Preza H <> wrote:
>
> Well.. I had a problem with that command but it was because I had a short
> circuit in one of the boards I created.
> Or because I was writing some incorrect info to the FPGA I guess.. but right
> now I don't remember.
> I'm working in my free times on that board.. so if I remember something, I'll
> comment!
>
> Regards,
> Enrique Preza
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|