OK, for some reason, irq=22 and irq=33 don't work. However, setting irq=40 in
the modprobe command allows me to open a minicom terminal on that port
(hurray!).
Don
--- In "Rekcut_Nod" <> wrote:
>
> When I run wvdial in the 2.6 kernel I get an input/output error. If I open a
> minicom terminal on the port and type "ATZ" I get no response. I'm trying to
> figure out what I need to do to configure the port so that it will work with
> the TS-GSM1.
>
> modprobe ts72xx_isa16550 irq=22
> serial8250: ttyS0 at MMIO 0x11e003e8 (irq=22) is a 16550A
>
> more /proc/tty/driver/serial
> 0: uart: 16550A mmio: 0x11E003E8 irq:22 tx:0 rx:0 CTS|DSR
>
> I compare that to what I get in the 2.4 kernel (in which the driver is
> auto-loaded and wvdial works):
>
> 2: uart: 16550 port: 89C003E8 irq:40 tx:0 rx:0 CTS|DTS
>
> Looking at the memory map, though, 0x89C003E8 is in the SDRAM, which doesn't
> make sense. Also, if I base modprobe baseio=0x89C00000 when loading the
> driver, I get a seg fault. Somehow the ports are configured differently in
> the two kernels, but I can't see how.
>
> Anyone get TS-GSM1 to work with a 2.6 kernel?
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|