| To: | ts <> |
|---|---|
| Subject: | [ts-7000] com1 com2 communication on ts7370 |
| From: | |
| Date: | Tue, 1 Feb 2011 16:31:04 -0800 |
Hello,
Development serial port is ttyAM0
Serial com1 port is ttyAM1
Serial com2 port is .... not ttyAM2!
/dev/ttyAM2 points to com1 again.
crw------- 1 root tty 204, 16 Feb 2 00:15 /dev/ttyAM0
crw-rw-rw- 1 root dialout 204, 17 Feb 2 00:15 /dev/ttyAM1
crw-rw-rw- 1 root dialout 204, 18 Feb 2 00:11 /dev/ttyAM2
Where can I change this configuration setting?
I am using etch and default sdcard.
--
Emmanuel
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Re: version problem in module compilation TS7260, omarcillo1 |
|---|---|
| Next by Date: | [ts-7000] TS serial number, asokulski |
| Previous by Thread: | [ts-7000] Re: TS-GSM1 with the 2.6 kernel, Rekcut_Nod |
| Next by Thread: | [ts-7000] Re: com1 com2 communication on ts7370, Kris |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU