I'm still trying to get the modules to work. Now I added the line
'/usr/bin/loadUSBModules.sh' in my /etc/rc.d/rcS.sysinit file and they seem to
load fine.
So what makes them fail when I try to load them through telnet?
Please if you have any ideas let me know.
Thanks!
-S
--- In Kevin Cozens <> wrote:
>
> Simon wrote:
> > After that, the board stops working and I can't log back in unless I
> > re-boot it. I tried to do what you suggested, but it seems that the top
> > command is not included in the board. I can run 'ps' but that's not
> > real-time, so it's no good.
>
> You have verified that the board actually stops working by checking if you
> can issue commands in a second terminal session that was started before
> trying to load the usbcore module?
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|