So, since the problem started with loadUSBModules.sh, I tried to install each
of the modules separately and this is what I got:
$ insmod usbcore -> stops working
$ insmod pcipool -> installs without problems
$ insmod usb-ohci -> Error: Unresolved symbols (from usbcore)
$ insmod usb-ohci-ep93xx -> Error: Unresolved symbols (from usb-ohci)
$ insmod scsi_mod -> stops working
$ insmod sd_mod -> unresolved symbols (from scsi_mod)
$ insmod usb-storage -> unresolved symbols
So maybe my problem is connected with the SCSI somehow...
Any ideas?
-S
--- In Kevin Cozens <> wrote:
>
> Simon wrote:
> > After that, the board stops working and I can't log back in unless I
> > re-boot it. I tried to do what you suggested, but it seems that the top
> > command is not included in the board. I can run 'ps' but that's not
> > real-time, so it's no good.
>
> You have verified that the board actually stops working by checking if you
> can issue commands in a second terminal session that was started before
> trying to load the usbcore module?
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|