Re: [ts-7000] Mangled baud rate on TS7200 2.6.34 console on ttyAM1 in early init stages

[Petr Štetiar <>]

William C. Landolina <> [2010-12-24 22:28:29]:

> Using Matthieuâs patches Iâve built a TS7200 2.6.34 kernel.  When I select
> ttyAM0 as the console all is well.  If I select ttyAM1, output is corrupted
> (probably wrong baud rate) between the âbooting kernelâ message from the
> decompressor and the âconsole [portname] enabledâ message.  (Sample output
> below)

Hi,

take a look at CONFIG_EP93XX_EARLY_UART{1,2,3} kernel config options.

-- ynezz


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/