Re: [ts-7000] Re: connect serial port with other device

[Jason Stahls <>]

On 11/12/2010 6:13 AM, ricardogabriel5 wrote:
> I have removed the jumper 2, but the serial port does not work at the speed 
> of 38400 bps.
>
> The serial port as console works fine.
> But it's not what I need.
>
> I need the serial port can communicate with a board with PIC (PANADBOARD), 
> not a PC.

Are you sure you've get the pinout right?  Check both boards serial 
pinout, you may need a null modem cable.  If both boards have tx/rx on 
the same pins then you need a null modem cable or to rewire one port so 
the rx/tx lines (and flow control lines if your using them) are swapped.

-- 
Jason Stahls


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/