--- In Jason Stahls <> wrote:
>
> On 11/12/2010 6:13 AM, ricardogabriel5 wrote:
> > I have removed the jumper 2, but the serial port does not work at the speed
> > of 38400 bps.
> >
> > The serial port as console works fine.
> > But it's not what I need.
> >
> > I need the serial port can communicate with a board with PIC (PANADBOARD),
> > not a PC.
>
> Are you sure you've get the pinout right? Check both boards serial
> pinout, you may need a null modem cable. If both boards have tx/rx on
> the same pins then you need a null modem cable or to rewire one port so
> the rx/tx lines (and flow control lines if your using them) are swapped.
>
> --
> Jason Stahls
>
Don't forget that the serial console is your only way to connect to redboot. If
something goes wrong and the board won't boot, you have disabled your login
console , how are you going fix it ?!
I strongly suggest you set up another boot console on the other serial port
before going any further.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|