I get those messages if the USB flash is not plugged into the USB port.
Do you have your USB flash drive plugged into the BOTTOM USB port on the
board?
Don
On 11/12/2010 9:09 AM, spencerottarson wrote:
>
> I have followed the instructions exactly, including the fsck. When I
> run loadUSB.sh, it gives me these messages:
>
> chroot: cannot execute /etc/init.d/rcS.USB: No such file or directory
> umount: /mnt/cf/proc/bus: No such file or directory
> umount: /mnt/cf/dev/pts: Invalid argument
> umount: /mnt/cf/proc: Invalid argument
>
> I used the Debian sarge image for the 2.4 kernel directly from the
> embeddedarm website.
>
> --- In <ts-7000%40yahoogroups.com>, Don
> Tucker <> wrote:
> >
> > Checkout section 5.2, Updating the EXT2 Image, from the
> > linuxforarm-manual.pdf for instructions on how to set up the USB drive
> > for boot. The instructions say to use tar -xfvj, but the j is for bzip.
> > Use the appropriate tar argument for a gzipped file.
> >
> > Don
> >
> > On 11/11/2010 5:23 PM, spencerottarson wrote:
> > >
> > > I am using the 2.4 kernel. I am new to this kind of stuff, and i do
> > > not know how to compile a kernel myself, or edit the initrd.
> > > Another question about how to put the debian image on the usb flash
> > > drive. I have downloaded the .tar.gz file from the embedded arm
> > > website, but what am I supposed to do with it? Do i just put it
> > > directly on the flash drive, or extract it first, or something else?
> > >
> > >
> >
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|