USB part is now working, problem was that my USB port wasn't powered up after
bootup. I had to explicitly poke values in the memory address related to USB
ports.
I used this post to do that:
http://tech.groups.yahoo.com/group/ts-7000/message/18106
Thanks
Ashwin.
--- In Petr ©tetiar <> wrote:
>
> ashwin <> [2010-10-25 05:46:40]:
>
> Hi,
>
> > My USB doesnt seem to work, the test i carried out was on linux kernel and
> > the file system on ts 7260. I do get messages about usb devices on boot up
> > telling that new usb hub found , then usb-ohci device registered. But when
> > i plug in any usb device nothing happens.I tried it with USB serial
> > converter pl 2303, even though i have the driver registered for this device
> > ,when i plug it dmesg doesnt show any activity.
>
> please show me output of dmesg and lsmod. I think, that the driver for pl2303
> is not part of the filesystem, I've tried to make it small. You'll need to
> unpack modules[1] to your filesystem, there's pl2303 driver. Just do:
>
> $ tar xvzf modules-2.6.34-r4-ts72xx.tgz -C /path/to/your/rootfs
>
> 1. http://ynezz.ibawizard.net/ts72xx/oe/latest/modules-2.6.34-r4-ts72xx.tgz
>
> -- ynezz
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|