ts-7000
[Top] [All Lists]

Re: Prebuilt 2.6.34.7 kernel for ts72xx, ts73xx, ts74xx [Was: Re: ts7300

To: "" <>
Subject: Re: Prebuilt 2.6.34.7 kernel for ts72xx, ts73xx, ts74xx [Was: Re: ts7300 kernel patches [Was: [ts-7000] TS-7800 - newer kernel support.]]
From: Ian Thompson <>
Date: Thu, 28 Oct 2010 15:17:18 -0500
Petr

I have rebuilt with the config file I had from before and now it boots.
I still need to check that the ethoc module works.

Ian T.

On 10/27/2010 10:08 AM, Ian Thompson wrote:
> Petr
>
> I took your patches and applied them to a clean 2.6.34 code base. All
> applied without error. I applied some changes to the .config,  built and
> tested.
> The attached files show the debug outputs from the kernel I built
> originally and the one that was built from the patches.
> There are some differences but only minor.
> There seems to be a problem reading linuxrc!
> Unfortunately, I can't compare it against my kernel build tree as I had
> a disk crash and haven't managed to rebuild it yet.
>
> Ian T.
>
>
>
> On 10/23/2010 01:35 AM, Petr Štetiar wrote:
>> Petr Štetiar<>   [2010-10-21 22:00:20]:
>>
>>> Hi,
>>>
>>> I've updated the kernel patchset[1] and uploaded[2] the new kernel +
>>> filesystem for quick testing. The kernel should now boot and work on ts72xx,
>>> ts73xx and ts7400.  BTW I've compiled ethoc driver as module and it's not 
>>> part
>>> of the image, so you'll need to unpack it manually from
>>> modules-2.6.34-r4-ts72xx.tgz.  Can you please try it? Any ts7400 volunteer 
>>> who
>>> could test it please also? :-) Thanks.
>>>
>>> 1. http://ynezz.ibawizard.net/ts72xx/linux-kernel/2.6.34.y/
>>> 2. http://ynezz.ibawizard.net/ts72xx/oe/latest/
>> Hi Ian,
>>
>> can you please try to boot it on your ts73xx? BTW what board is it exactly,
>> ts7350? Thank you.
>>
>> -- ynezz
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
> This e-mail, including any attachments and response string, may contain 
> proprietary information which is confidential and may be legally privileged. 
> It is for the intended recipient only. If you are not the intended recipient 
> or transmission error has misdirected this e-mail, please notify the author 
> by return e-mail and delete this message and any attachment immediately. If 
> you are not the intended recipient you must not use, disclose, distribute, 
> forward, copy, print or rely on this e-mail in any way except as permitted by 
> the author.
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU