I've tested with 0x00000000 but it doesn't work...
--- In juan obando <> wrote:
>
>
> Could be the address 0x00000000 no?
>
> Juan Felipe Obando Obando Valencia.
>
>
>
> To:
> From:
> Date: Wed, 13 Oct 2010 12:30:47 +0000
> Subject: [ts-7000] Re: Timers and GPIO interrup tS-7800
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Hello,
>
>
>
> I've saw the documentation, but I have some doubts. For example, the FPGA has
> a physical address (0xe8000000). In this address I can control the DIO
> header, to put it like input and output.
>
>
>
> The problem is when I tried to access to the MV88F5182 registers. For
> example, the GPIODOut or GPIODOutEn. The documentation says that this
> register is in Offset 0x10100, but ¿which is the base address to access?
>
>
>
> Thanks,
>
>
>
> --- In Alexey Vdovin <av.nnov@> wrote:
>
> >
>
> > Take look at Technologic site:
>
> > http://www.embeddedarm.com/products/board-detail.php?product=TS-7800#
>
> > in Resources section
>
> >
>
> > # Open-source MV88F5182 manual
>
> > http://www.embeddedarm.com/documentation/third-party/MV88F5182-opensource-manual.pdf
>
> >
>
> > # Marvell MV88F5182 User Manual
>
> > http://www.embeddedarm.com/documentation/third-party/MV88F5182-usermanual.pdf
>
> >
>
> > ---
>
> > Best Regards
>
> > Alexey Vdovin
>
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|