RE: [ts-7000] Re: Timers and GPIO interrup tS-7800

[juan obando <>]

I only have tested the FPGA with the base register 0x8e00000000.
Sorry.

Juan Felipe Obando Obando Valencia.

---

To:
From:
Date: Wed, 13 Oct 2010 12:30:47 +0000
Subject: [ts-7000] Re: Timers and GPIO interrup tS-7800

 

Hello,

I've saw the documentation, but I have some doubts. For example, the FPGA has a physical address (0xe8000000). In this address I can control the DIO header, to put it like input and output.

The problem is when I tried to access to the MV88F5182 registers. For example, the GPIODOut or GPIODOutEn. The documentation says that this register is in Offset 0x10100, but ¿which is the base address to access?

Thanks,

--- In Alexey Vdovin <> wrote:
>
> Take look at Technologic site:
> http://www.embeddedarm.com/products/board-detail.php?product=TS-7800#
> in Resources section
>
> # Open-source MV88F5182 manual
> http://www.embeddedarm.com/documentation/third-party/MV88F5182-opensource-manual.pdf
>
> # Marvell MV88F5182 User Manual
> http://www.embeddedarm.com/documentation/third-party/MV88F5182-usermanual.pdf
>
> ---
> Best Regards
> Alexey Vdovin
>

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___