[ts-7000] Re: Timers and GPIO interrup tS-7800

["jblesa" <>]

Hello,

I've saw the documentation, but I have some doubts. For example, the FPGA has a 
physical address (0xe8000000). In this address I can control the DIO header, to 
put it like input and output.

The problem is when I tried to access to the MV88F5182 registers. For example, 
the GPIODOut or GPIODOutEn. The documentation says that this register is in 
Offset 0x10100, but ¿which is the base address to access?

Thanks,

--- In  Alexey Vdovin <> wrote:
>
> Take look at Technologic site:
> http://www.embeddedarm.com/products/board-detail.php?product=TS-7800#
> in Resources section
>
> # Open-source MV88F5182 manual
> http://www.embeddedarm.com/documentation/third-party/MV88F5182-opensource-manual.pdf
>
> # Marvell MV88F5182 User Manual
> http://www.embeddedarm.com/documentation/third-party/MV88F5182-usermanual.pdf
>
> ---
> Best Regards
> Alexey Vdovin
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
    
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/