| To: | |
|---|---|
| Subject: | RE: [ts-7000] ts-7400 & 2.6 kernel |
| From: | Russ Nelson <> |
| Date: | Mon, 24 May 2010 12:22:20 -0400 |
On Mon, 2010-05-24 at 09:00 -0700, Razvan-Ionut Stoian wrote:
>
>
> So in order to send commands to your USB modem you used the cdc_acm.ko
> module, after all?
No. There's a driver specifically made for USB cell modems. It was
originally only for the Option products, but its use has been expanded
to other products, including the Novatel.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | RE: [ts-7000] ts-7400 & 2.6 kernel, Razvan-Ionut Stoian |
|---|---|
| Next by Date: | [ts-7000] getty and 'dialout' on the same serial port, Ken Irving |
| Previous by Thread: | RE: [ts-7000] ts-7400 & 2.6 kernel, Razvan-Ionut Stoian |
| Next by Thread: | [ts-7000] Re: TS-TPC-7390 X11VNC to DISPLAY:0.0, vancka |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU