Hi Jason,
Starting x11vnc directly on 7390 works perfectly.
Thank you very much for the help.
Regards,
IVan
--- In Jason Stahls <> wrote:
>
> wildpossum928 wrote:
> > Hi Ivan.
> >
> > A> Check that the X Widows subsystem is running ( "ps aux|grep X" or have a
> > look at proc.fs to check its operational.
> >
> > B> Check that /etc/X11/ config is "sane" and reasonable.
> >
> > C> Try bringing up XDM or VNC directly on the 7390 (assuming your got the
> > h/w to do so).
> >
> > D> Checkout the /var/log/X.log messages to see if there is something
> > missing.
> >
>
> E> Once it's working, don't touch it!
>
> I use XDM/Xvnc at home on my server since it's headless and have had
> more then one headache over the past few years from it. Another thing
> that has bitten me in the past is if your loopback interface isn't up
> then Xvnc won't be able to connect. If you have another Linux PC try
> connecting to XDM on the TS board with it to atleast prove that X is
> setup right.
>
> --
> Jason Stahls
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|