I did in fact email TS Tech support last weekend and got a response Monday.
They posted the kernels I was looking for on the
ftp://oz.embeddedarm.com/ts-arm-sbc/ts-7250-linux/binaries/ts-kernels/
website. The TS-7250 now works as it should.
I discovered that the reason Linux had degraded and I felt it necessary to
re-flash in the first place was because I had boluxed up an edit of 'inittab'.
I had edited it in Windows and forgot to convert it back to Linux (LF only)
format. This caused several problem including not finding the network on boot
up. Once I converted it everything worked fine (with the kernel newly posted
on the ftp site).
That mistake turned into a great learning experience...
--- In "j.chitte" <> wrote:
>
>
>
> --- In "gbever2003" <gbever@> wrote:
> >
> > Have you been to the Technologic ftp distribution site? Try:
> >
> > ftp://66.135.63.78/ts-arm-sbc/ts-7260-linux/distributions/
> >
> > There's no way of knowing (that I know of) to tell what the 'standard' load
> > is. That is, in essence, what I have been asking about. The one I think I
> > need does not appear to be on the distribution site. There are some
> > limited descriptions in the manuals which can be found on the ftp site:
> >
> > ftp://66.135.63.78/ts-arm-sbc/ts-7260-linux/manuals/
>
> ftp://66.135.63.78/ts-arm-sbc/ts-7250-linux/binaries/ts-kernels/
>
> there is a no rt kernel for the 2k version of 7250 what I was using when on
> 2.4 , but is for boards with 128M of flash. It sounds like you may be looking
> for the smaller version.
>
> Why not email TS tech support?
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|