Is there a place that describes what the different images are and which are the
'defaults' for each board on the ftp site?
I have a 7260 that i'm trying to get usb to work and the manual refers to the
.SH script you mention - but it isn't on the image I have on the board.
--- In "gbever2003" <> wrote:
>
> I recently purchased a second ts-7250 after using the first for months
> without problem. This second board I configured like the first (I think),
> loaded and ran the same programs. After a day or so it started behaving
> strangely. Certain Linux commands didn't function right (like 'ps' and
> 'mount'). After another day it stopped reaching the network. Reboots would
> work--for awhile. Things got progressively worse and ultimately I could not
> get past Redboot.
>
> So I decided to re-flash the Linux load. I have been able to do that, but I
> can't get the system to reboot reliably. The system can run programs for
> days--as long as I don't reboot (and reload the Linux flash image). Without
> going into gory detail, my problem boils down to this: where can I find the
> TS-7250 image of 2.4.26-ts11 that is NOT 2.4.26-ts11-rt? The Technologic
> archives seem to skip that, yet that is what is on my other T-7250 and what
> utilities such as 'loadUSBModules.sh' are built for. I just want to restore
> the board to a stable ts11 configuration for which the files on the board are
> built.
>
> A second, more troubling question is: why did the board go screwy in the
> first place?
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|