| To: | |
|---|---|
| Subject: | [ts-7000] Re: TS7260-Reading from /dev/ttyUSB0 |
| From: | "mccarl1978" <> |
| Date: | Mon, 08 Mar 2010 03:35:17 -0000 |
--- In Jim Jackson <> wrote:
>
>
>
> read returns a ssize_t type. unsigned char allows a value of from 0 to
> 511 - so there is the possibility of truncation is read read a
>
>
Just a small point but the range of unsigned char is 0 to 255 ;) But other than
that, I concur with Jim's answer as to what is happening here. Did that work?
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] Porting U Boot onto TS7200, Curtis Monroe |
|---|---|
| Next by Date: | Re: [ts-7000] Porting U Boot onto TS7200, Balaji Ravindran |
| Previous by Thread: | Re: [ts-7000] Re: TS7260-Reading from /dev/ttyUSB0, Jim Jackson |
| Next by Thread: | Re: [ts-7000] Re: TS7260-Reading from /dev/ttyUSB0, Jim Jackson |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU