You should be able to use the SerialBlaster to load and run U-Boot.
SerialBlaster was really meant to be used for stuff like this. (To be a
rough starting point for developers.)
Assuming your TS-7200 is not one of the earlier version that rebooted
faster than it could load the SerialBlaster and your PC is fast enough,
or you apply some tweeks, you should be able to boot to serialblaster
and then download U-boot via the same serial connection and execute it.
If that works, you can find a place in NAND Flash and burn U-BOOT there.
You can also burn SerialBlaster into EEPROM (if you compile it for that
purpose) so you don't have to bootload it from serial each time.
You might want to add EEPROM and flash burning code to U-Boot and use
that to burn the two, so you don't need to use Redboot.
You can find eeprom burning code in the redboot patched that accompany
the serialblaster.
I have some unfinished ARM asm routines for a new version of
serialblaster that can read and write larger EEPROMS (if you want to
solder a bigger one on). It has virtual memory management, vt-100
terminal routines, interrupts, debugging routines, and access to the
RTC. I can send it to you. But I'm not sure what state its in. (I don't
think I left it in a bootable state, so you'd need to work on it.)
Good luck,
-Curtis.
On Sun, 2010-03-07 at 12:22 -0800, Balaji Ravindran wrote:
>
> Hi People,
>
>
>
> I wanted to port U-Boot to TS-7200 and wanted to make it run natively
> on that(its just a learning exercise, no specific reason). I have a
> modified U-Boot source for TS-7200 and build files, and wanted to test
> it on the board, and was wondering how to burn it to flash(overriding
> TS-BOOTROM and redboot +++)
>
>
> Since TS-7200's JTAG ports are not connected anywhere, i don't think i
> will be able to use my JTAG programmer, but i went through the serial
> blaster code, and was wondering if i will be able to use it with some
> tweaks, (ofcourse i need new binaries with uboot + filesystem, not
> bothering about linux kernel yet)
>
>
> Any ideas / comments / thoughts are welcome. Please let me know if
> this would even work, i see no reason why though, i just need a way to
> burn the flash with UBoot binaries, and i don't have enough money yet
> to buy the TS-9420, as this is for BSP learning purposes, and i don't
> want to spend 175 + shipping.
>
>
> Any cheaper alternatives for this task?
>
>
> All help appreciated.
>
>
> Thanks
>
>
> Balaji R
>
--
Curtis Monroe
Wk: 514-747-5076 x230
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|