|
Hi People, I wanted to port U-Boot to TS-7200 and wanted to make it run natively on that(its just a learning exercise, no specific reason). I have a modified U-Boot source for TS-7200 and build files, and wanted to test it on the board, and was wondering how to burn it to flash(overriding TS-BOOTROM and redboot +++)
Since TS-7200's JTAG ports are not connected anywhere, i don't think i will be able to use my JTAG programmer, but i went through the serial blaster code, and was wondering if i will be able to use it with some tweaks, (ofcourse i need new binaries with uboot + filesystem, not bothering about linux kernel yet)
Any ideas / comments / thoughts are welcome. Please let me know if this would even work, i see no reason why though, i just need a way to burn the flash with UBoot binaries, and i don't have enough money yet to buy the TS-9420, as this is for BSP learning purposes, and i don't want to spend 175 + shipping.
Any cheaper alternatives for this task? All help appreciated. Thanks Balaji R
__._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |