It is probably best to use the chat program which can send commands to modems
and report on the responses. It is used by pppd to establish a link and does
work with GSM modems and the TS-GSM1 in particular.
Look for tutorials on chat and ppp although the connection establishment is not
what you are trying to do.
--- In "haiqal" <> wrote:
>
> Hi All,
> I'm using TS-7800 with TS-GSM1..
>
> I already got signal from TS-GSM1 by using this command :
>
> pc104on
> / # modprobe ts7800_isa16550 irq=6 io=0x3e8
> / # dmesg
>
> serial8250: ttyS2 at MMIO 0xee0003e8 (irq = 70) is a 16550A
>
> / # cat < /dev/ttyS2 &
> / # echo "AT+COPS?" > /dev/ttyS2
> "MY CELCOM"..
>
> I already got the signel from the modem GR64....
> my question is :
>
> 1) Is that correct command I used "/ # cat < /dev/ttyS2 &" to get virtual
> terminal ..??
>
> 2)Kindly I appreciate any idea in this group to help me how to I send SMS
> /MMS/ dialing....
> I'm worried that is the simple mistake from the command that I miss looking...
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|