Re: [ts-7000] Re: TS-GSM1 send SMS

[fais faiz <>]

Hi Fauzi,

Kindly,thanks for the replying  the message and give the example program to send SMS ...

> I normally use minicom or screen to connect to the GSM modem from my
> TS7260. If you use Debian, you can install it using this command:
>
>  apt-get install minicom
>  apt-get install screen


Yes, I used Debian.  Do u mean I need to Install minicom inside the TS-7800..?


Faiz

On Mon, Mar 8, 2010 at 12:36 PM, ApOgEE <> wrote:

 

Hi haiqal,

> 1) Is that correct command I used "/ # cat < /dev/ttyS2 &"  to get virtual terminal ..??
>

I normally use minicom or screen to connect to the GSM modem from my TS7260. If you use Debian, you can install it using this command:

apt-get install minicom
apt-get install screen

 

> 2)Kindly I appreciate  any idea in this group to help me how to I send SMS /MMS/ dialing....
> I'm worried that is the simple mistake from the command that I miss looking...
>

I use python to create a program that can send SMS using TS-GSM1.

here is some snippet if you like to try:
# ----------------------- begin snippet --------------------
#!/usr/bin/python

"""
Developer: Muhammad Fauzilkamil Zainuddin
Started: 04 Aug 2008
Purpose: Send SMS using Python
Requires:   Python
            configobj.py
            pySerial
"""
import sys, os
import subprocess
import string
import time
from configobj import ConfigObj
import serial

# function to send data to GSM modem - by M. Fauzilkamil Zainuddin
def sendmdm(ser,commands):
    mreply=[]
    if ser.isOpen():
        ser.write(commands)
        time.sleep(0.5)
        norepcount = 0

        while 1:
            out = ser.readline()
            if out.strip()=='OK':
                mreply.append(out.strip())
                break
            if out.strip()=='>':
                mreply.append(out.strip())
                break
            if out.strip()!='':
                mreply.append(out.strip())
            if out.strip() == 'ERROR':
                mreply.append(out.strip())
                break
            if not out:
                if norepcount > 10:
                    break
                norepcount = norepcount + 1
                time.sleep(0.5)
    return mreply
# end of sendmdm function

# function sendsmsdata - by M. Fauzilkamil Zainuddin
def sendsmsdata(sphone,smsdata):
    smodem="/dev/ttyTS0"
    sbaud="9600"
    ser = serial.Serial(smodem,sbaud,timeout=0.2)
    fret = 0
    ser.open()
    if ser.isOpen():
        mrep = sendmdm(ser,'at+cmgs="' + sphone  + '"\r')
        if len(mrep) > 0:
            if mrep[len(mrep)-1] == '>':
                mrep = sendmdm(ser,smsdata + '\x1A')

                if len(mrep) > 0:
                    if mrep[len(mrep)-1] == 'OK':
                        fret = 1
        ser.close()
    return fret
# end sendsmsdata function

# example of sending SMS
if sendsmsdata("60193701234","This is the SMS message from Malaysia") == 1:
    print "Message Sent"
else:
    print "send data via sms Failed"

# --------------------------------------------------------------------- end snippet -----------


--
Best Wishes,

M. Fauzilkamil Zainuddin
Software Engineer
Persiasys Sdn. Bhd.
----------------------------------------------------
ApOgEE a.k.a JeRuNgKuN
----------------------------------------------------
https://edge.launchpad.net/~apogee - ApOgEE on LaunchPad
http://artofapogee.blogspot.com - Art Of ApOgEE
http://coderstalk.blogspot.com - Coder's Talk
----------------------------------------------------

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___