On Mon, 8 Mar 2010, tsao.terence wrote:
> Mew.. That still didnt work.
>
> But I fixed the problem by learning python and using pyserial : ) Why
> write C code when you can run python?
Because I don't have python running on my board?
> --- In Jim Jackson <> wrote:
>>
>>
>>
>>
>> On Mon, 8 Mar 2010, mccarl1978 wrote:
>>
>>> --- In Jim Jackson <jj@> wrote:
>>>>
>>>>
>>>>
>>>> read returns a ssize_t type. unsigned char allows a value of from 0 to
>>>> 511 - so there is the possibility of truncation is read read a
>>>>
>>> Just a small point but the range of unsigned char is 0 to 255 ;) But
>>> other than that, I concur with Jim's answer as to what is happening here.
>>> Did that work?
>>
>> Doh! Thanks for correcting my stupidity there, Phil.
>>
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|