On 3/3/10, sanjuan34 <> wrote:
> I've tried it with nothing connected, and I've tried with with an Atmel
> AT90CAN128 connected. I'm running a CAN monitor program on the Atmel, and
> I'm also looking at CAN_H and I see zero activity.
>
> --- In Joel Morgan <> wrote:
>>
>> On 3/2/10, sanjuan34 <> wrote:
>> > Hi. I'm trying to get CAN bus working using a TS-CAN1 on a 7530 board.
Is this a 7350?
What kernel are you running?
>> > I'm
>> > loading the kernel module with out any errors using the following
>> > parameters
>> >
>> > insmod -f lincan.ko io=0x150 hw=tscan irq=33
>> >
>> > (for IRQ6, JP4 on, I/O address 150, JP1 and JP2 off)
>> >
>> > I can run lincan utilities like sendburst, sendcan, readcan with out
>> > error;
>> > however, I'm getting no activity on CAN_H and CAN_L. All I see when
>> > looking
>> > at either line is a very odd looking 60Hz signal, about 2Vp-p. The
>> > signal is
>> > persistent whether the kernel module is loaded or not.
>>
>> What other CAN nodes do you have connected?
--
Joel R. Morgan
Morgan Millwright Services, Inc.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|